Excellent adhesion with all materials for voice coils that do not require additional surface preparation and already have a preliminary adhesive layer. Single Component, heat cure adhesive formulated for bonding and coating loudspeaker voice coil windings to make them resistant to temperatures over 500°C. Suitable for coating aluminum, copper, copper clad aluminium voice coils as well as a wide range variety of materials such as Kapton, Fiberglass Composite and Nomex.
Application: Apply with a brush. Place coil in oven after air drying for the first touch and first stage. Dry at 140 degrees Celcius for 1 minute. Remove parts and allow to cool. Then post cure in the oven for 1 hour at 190 degrees Celcius for the second stage to obtain maximum heat resistance.
After use: after use, seal and store quickly to avoid long-term contact with air. The conteiner should be cleaned to avoid mixing with other chemicals, damaging the product negatively effects the end result. Keep the storage room and workshop dry, vantilated, away from fire. Pay attention to safety and protection, wear special anti-corrosion gloves, mask, goggles, etc.
Technical Specifications:
| Application Purpose |
Voice Coil Winding |
| Areas Of Application |
Aluminum, Copper, Copper Clad Aluminum, Kapton, Fiberglass, Nomex |
| Color |
Yellow |
| Inhalt |
110 ml |
| Gewicht |
119 gr |
| Temperature resistance |
500°C |
|
Safety Instructions
GHS / H Hazard Statements
H 411: Toxic to aquatic life, with long-lasting effects
H 315: Causes skin irritation
H 319: Causes serious eye irritation
H 317: May cause an allergic skin reaction
H 318: Causes serious eye damage
GHS Precautionary Statements
P 101: If medical advice is needed, have product container or label at hand
P 102: Keep away from children
P 103: Read the label before using the product
P 261: Avoid inhaling dust/fume/gas/mist/vapours/spray
P 280: Wear protective gloves/protective clothing/eye protection/face protection
P 273: Avoid release into the environment
P 310: Contact Poison Control Center or seek medical advice immediately
P 302+352: SKIN CONTACT: Wash with soap and water
P 305+351+338: CONTACT WITH EYES: Rinse cautiously with water for several minutes. Remove contact lenses if applicable/possible. Continue rinsing
P 501: Dispose of contents/container at …
